https://hu-zlatan.github.io/embodied-ai-radar/robots/arm.xml 2026-10-29T00:00:00ZEmbodied AI Radar https://arxiv.org/abs/2610.37582 2026-10-28T00:00:00Z

Supernumerary robotic fingers augment human dexterity by enabling a single hand to perform complex "hold-and-manipulate" tasks that typically require bimanual coordination. However, existing devices are often hindered by bulky hardware that limits interaction to large objects and rely on explicit hand motion triggers that lack environmental context. To address these challenges, we present EgoThumb, a fully open-source, vision-driven supernumerary robotic thumb. EgoThumb features a compact, dual tendon-driven finger whose actuation is relocated to the forearm, reducing distal weight while …

https://arxiv.org/abs/2610.37533 2026-10-28T00:00:00Z

Failure diagnosers for robot manipulation are increasingly vision--language models (VLMs), trained and evaluated on single-arm failures produced by perturbing a successful demonstration. Bimanual tool use adds failures of other kinds: a tool that slips out of its socket while still held, two correct gestures made at different times, and attempts that fail for two reasons at once. On a simulated bimanual tool-use task whose failure causes are read from the recorded trace, we measure what each sensing channel lets a diagnoser tell. The tool's slip is read on the tool hand; which hand was late …

https://arxiv.org/abs/2610.37043 2026-10-28T00:00:00Z

Spacecraft-mounted robotic manipulators can support long-term operability of orbiting assets by conducting tasks such as on-orbit assembly, repair, upgrade, and refueling. In this context, the integration of continuum/soft robotic mechanisms into space manipulator designs promises to reduce stowage volume and mass, as well as to improve operational safety through the inherent mechanical compliance of soft structures. This work presents a novel state reconstruction pipeline for a hybrid soft-rigid space manipulator, in which the distal link is a tendon-driven continuum robot. The estimation …

https://arxiv.org/abs/2610.36996 2026-10-28T00:00:00Z

This paper presents a mixed discrete-continuous multiobjective bilevel framework for the structure-actuation co-design of all-electric heavy-duty robotic manipulators. The upper level optimizes manipulator geometry and actuation topology, while joint-specific lower-level searches construct feasible archives of discrete motor, gearbox, and screw configurations. A system-level coordinator selects actuator packages according to hardware mass, co-design cost, and loss-aware supply energy, and the resulting actuator masses are fed back to the robot model until a mass-consistent fixed point is …

https://arxiv.org/abs/2610.36961 2026-10-28T00:00:00Z

Maintaining contact in non-prehensile manipulation requires more than nominal friction cone feasibility: a force barely inside the cone and one well inside it are both feasible, but they provide different margins against slip and contact loss. This paper uses signed friction distance to measure friction margin in force space and derives a task-adaptive margin from the force correction needed to balance pivot moment deviations in bimanual tilting. The resulting contact margins are embedded in a sequence of second-order cone programs (SOCPs), each giving a globally optimal contact force …

https://arxiv.org/abs/2610.36725 2026-10-28T00:00:00Z

Mobile robot manipulators extend contact-task capability beyond the workspace of fixed robot installations, but their bases must also sustain the forces generated by the task. On lightweight platforms, base motion and support compliance can change the force and motion realised at the workpiece. How these non-rigid base effects manifest during sustained contact remains insufficiently characterised. This paper investigates non-rigid base effects in mobile robot manipulators through a sanding case study combining exploratory simulation with experiments on two lightweight, unactuated wheeled …

https://arxiv.org/abs/2610.36685 2026-10-28T00:00:00Z

Bimanual robot manipulation plays an important role in real-world robotic applications, but the high cost of collecting bimanual demonstrations limits the scalable development of bimanual policy learning. Meanwhile, existing single-arm manipulation data are difficult to directly transfer to bimanual systems due to the Single-to-Dual gap in action spaces, coordination requirements, and arm-side spatial preference. To address this issue, we propose RoboSTD, a zero-shot Single-to-Dual data construction method for bimanual robot learning. RoboSTD first applies sagittal-plane mirroring to …

https://arxiv.org/abs/2610.36250 2026-10-28T00:00:00Z

Multi-arm manipulation has the potential to dramatically improve the throughput, efficiency, and dexterity of many manipulation tasks. Recent work coordinates multiple robot arms in a shared workcell by allocating and scheduling tasks for greater parallelism, jointly planning multi-arm motions, or directly learning multi-arm policies. So far, these approaches are either too slow, rely on domain-specific assumptions, or scale poorly with the number of robots and task horizon. Thus, we introduce cuArms, a conflict-based planner co-designed with GPU parallelism that efficiently decomposes the …

https://arxiv.org/abs/2610.35058 2026-10-27T00:00:00Z

Estimating forces acting on Deformable Linear Objects (DLOs) is challenging due to their underactuated nature. However, reliable contact estimation is crucial to precisely control them and enable safe manipulation tasks. Differently from the various approaches presented in the literature, this work adopts a probabilistic formulation where the DLO state and sensor data are related through conditional distributions. In particular, factor graphs are used to determine the magnitude, direction, and location of a 3D force acting on a DLO, while simultaneously reconstructing its shape. Since DLOs …

https://arxiv.org/abs/2610.34519 2026-10-27T00:00:00Z

Vision-language-action (VLA) models are increasingly used for robot manipulation because they map camera images and a language instruction directly to actions. Robots that cannot be tethered to a workstation, such as mobile manipulators and humanoids, must run them on onboard embedded boards, where the prefill latency of the language backbone grows with the hundreds of visual tokens processed at every control step. To meet real-time limits, training-free accelerators recompute only a subset of the visual tokens and skip the rest, either by pruning them or by reusing their cached key-value …

https://arxiv.org/abs/2610.34454 2026-10-27T00:00:00Z

This paper presents two controllers for a quadrotor equipped with a two-DOF robot manipulator that physically interacts with the environment. Cartesian impedance and adaptive sliding mode controllers are implemented and compared for a simple hovering task in the presence of some bounded disturbance. A full dynamic model is developed, and the two above controllers are implemented with the same initial conditions and desired position.

https://arxiv.org/abs/2610.33947 2026-10-27T00:00:00Z

Bimanual robotic control requires simultaneous management of distinct functional demands under motor noise, energetic costs, and communication delays. We investigate how learning responsibility should be organised across modular controllers and the two arms in a simulated musculoskeletal system with two communicating recurrent controllers. Using a 2 x 2 design, we compare differential versus shared controller objectives and fixed versus balanced hand-task assignments. Task-aligned functional specialisation was strongest when differential objectives were combined with a fixed assignment …

https://arxiv.org/abs/2610.33807 2026-10-27T00:00:00Z

Video world models (VWMs) are rapidly emerging as scalable neural simulators for robotic manipulation. However, most benchmarks only evaluate them as open-world video generators, using Vision-Language Models (VLMs) that lack strict 3D spatial and kinematic reasoning. To bridge this gap, we introduce RoboWorM, a comprehensive, deployment-aware benchmark that leverages known hardware priors such as robot kinematic trees and fixed camera configurations, to systematically examine structural and spatiotemporal fidelity. RoboWorM curates 1,605 episodes across single-arm, bimanual, and humanoid …

https://arxiv.org/abs/2610.33715 2026-10-27T00:00:00Z

The integration of quantum computing into robotics requires mathematical representations that preserve the geometric structure and configuration dependence of robot motion. This paper introduces a structure-preserving quantum representation of rigid-body transformations and serial-manipulator kinematics, establishing a correspondence between classical kinematic models and parameterized quantum circuits. Building on the Bloch-sphere representation, spatial directions are encoded into single-qubit states, while quantum rotations reproduce the ordered composition of reference-frame …

https://arxiv.org/abs/2610.32271 2026-10-26T00:00:00Z

Vision-language-action (VLA) models are typically pretrained on broad, diverse datasets and subsequently fine-tuned on a comparatively small dataset tailored to a specific target robot. Such adaptation recipe is now widely established, achieving its most mature results on fixed-base arms due to their static base dynamics and consistent reference frame. Mounting the same arm on a quadruped extends the workspace to the entire floor, but fundamentally changes the embodiment: rather than controlling the arm in isolation, the policy must jointly coordinate base navigation, body posture, and …

https://arxiv.org/abs/2610.32034 2026-10-26T00:00:00Z

The growing population of orbital debris has intensified interest in active debris removal and on-orbit servicing, for which dual-arm space manipulators offer improved grasping stability and load distribution relative to single-arm systems. However, coordinating two manipulators under inter-arm collision avoidance, orientation alignment, and sensing uncertainty remains challenging. This paper develops a coordinated reinforcement learning framework for cooperative motion planning of a dual-arm space manipulator in a target-reaching task with inter-arm collision-avoidance constraints. A …

https://arxiv.org/abs/2610.30988 2026-10-23T00:00:00Z

Robust manipulation of soft objects, such as garments, is a critical skill for service and household robots to adopt, but remains challenging due to its high-dimensional state space, and material-dependent deformations. Humans address this challenge by using mental world models that "imagine" the shape and material properties from partial observations, which enables them to predict how actions affect future states. As such, embedding such world models in robots allows for better generalization in manipulating a wide variety of garments in the real world. However, learned world models …

https://arxiv.org/abs/2610.30452 2026-10-23T00:00:00Z

Currently, CT-guided lung biopsy is a highly manual procedure requiring patient breath-holding, iterative manual needle insertions, and repeated CT confirmation scans to accurately target a tumor. Automating this process within the CT bore--without relying on manual needle placement or patient breath-holding--has the potential to reduce procedure time, patient discomfort, and radiation exposure. In this work, we present an integrated sensing and control system capable of performing a gated needle insertion within the CT bore. The experiments demonstrate the system's ability to track and …

https://arxiv.org/abs/2610.29997 2026-10-22T00:00:00Z

Despite recent progress in dexterous reference tracking, existing models focus primarily on single-hand manipulation and a limited range of interactions, leaving the bimanual dexterous behaviors common in real life unaddressed. The scarcity of contact-rich bimanual manipulation data and the increased complexity of coordinating contacts make developing a generalist bimanual tracker particularly challenging. Therefore, we present 1) DONIC, the first generalist bimanual tracker jointly trained across operation categories and human-motion sources, together with 2) BiHOI, a multi-view dataset of …

https://arxiv.org/abs/2610.29964 2026-10-22T00:00:00Z

Mobile manipulators must navigate safely in cluttered, partially unknown environments across logistics, manufacturing, and service applications. Semi-static changes between robot visits can lead to outdated scene knowledge and increased collision risk. We propose an active perception framework that enables a high degree-of-freedom (DoF) mobile manipulator to inspect uncertain or safety-critical regions with its hand camera during navigation. A probabilistic, object- and task-aware next-best-view (NBV) formulation prioritizes observations near the desired path and around uncertain or …

https://arxiv.org/abs/2610.29716 2026-10-22T00:00:00Z

We present SpatialDex, a framework that learns 3D-grounded bimanual dexterity from RGB-only human videos through reconstruction-augmented visuomotor pre-training. The central idea is to learn human behavior together with its spatial context. From each video, we reconstruct the scene geometry and estimate the hand motion, align them at a shared video-level scale using the hand-size prior of 3D hand estimates. We retain the reconstructed geometry as both a policy input and a prediction target. The policy grounds the token grid of a pre-trained vision-language model in this geometry through …

https://arxiv.org/abs/2610.29570 2026-10-22T00:00:00Z

This article investigates the joint-angle invariance (JAI) of Jacobian-based performance indices for serial robotic manipulators. We identify kinematic conditions under which representative performance indices, including manipulability, stiffness, and other Jacobian-derived indices, remain independent of the first and last joint angles. This property allows a systematic reduction in the effective configuration-space dimensionality, thereby simplifying the performance evaluation. The utility of JAI is demonstrated through two application scenarios: workspace performance map construction and …

https://arxiv.org/abs/2610.29568 2026-10-22T00:00:00Z

In this article, we propose ContactFlowFilter, a novel approach for contact estimation that determines the number of active contacts, their locations, and the associated force vectors. We consider a robot manipulator equipped with joint torque sensors and a base force/torque sensor; such a proprioceptive-only setup presents a challenging inverse problem characterized by (i) multi-modality from non-unique solutions, (ii) temporal dependencies in state evolution, and (iii) discrete contact events involving contact addition/removal. Existing approaches, such as particle filters (PFs) and …

https://arxiv.org/abs/2610.29565 2026-10-22T00:00:00Z

Teleoperation enables intuitive control of remote engineering robots for precision tasks. Existing direct joint-mapping methods have two limitations: independent motor saturation disrupts pitch-roll coordination in differential wrists, while fixed mappings struggle with abrupt tracking changes caused by gravitational loads and actuation constraints. We propose an actuator-constraint-aware leader-follower teleoperation method that jointly models leader gravity compensation, leader-follower joint mapping, and follower differential-wrist control. Specifically, we perform coordinated saturation …

https://arxiv.org/abs/2610.29452 2026-10-22T00:00:00Z

Robust and reactive collision avoidance remains a central challenge for deploying Reinforcement Learning (RL) policies on real robotic manipulators, particularly when transferring behaviours learned in simulation to the physical world. This paper presents an RL framework that integrates the Euclidean Distance Field (EDF) directly into the observation space, providing the agent with continuous geometric cues that support stable and responsive avoidance behaviours. By leveraging the rich spatial information encoded in the EDF, the method enables a streamlined reward formulation that achieves …

https://arxiv.org/abs/2610.28948 2026-10-22T00:00:00Z

Mobile manipulators must adapt not only to objects, but also to the spatial context in which they appear: where to position the base, how to manipulate, and where to look while navigating surrounding scene geometry. To address this, we present COWBOY, a scalable sim-to-real framework for learning such contextual whole-body manipulation. On whole-body dexterous grasping, COWBOY transfers zero-shot to hundreds of objects and diverse in-the-wild scenes, spanning cluttered tabletops, shelves, drawers, and other unstructured settings. Rather than learning scene adaptation directly with RL in …

https://arxiv.org/abs/2610.27905 2026-10-21T00:00:00Z

General-purpose manipulators can position ophthalmic instruments under a software Remote Centre of Motion (RCM). However, at some reachable configurations that are nonsingular for the tip task alone, the RCM and tip-tracking objectives conflict and the servo oscillates. We formalise this failure as a constraint-induced task singularity: the RCM-projected tip Jacobian loses rank while the unprojected tip Jacobian stays well conditioned. Thus, the effective tip authority collapses although the target remains reachable. We present a high-precision RCM servo architecture with built-in singularity …

https://arxiv.org/abs/2610.27472 2026-10-21T00:00:00Z

Mobile legged robots offer unique advantages for on-site construction, including the ability to traverse unstructured terrain, climb stairs, and operate independently between spatially separated work zones. This paper presents a proof-of-concept system for autonomous brick stacking using a Boston Dynamics Spot quadrupedal robot equipped with a manipulator arm. The system operates between a supply area and an assembly area, using AprilTag fiducials for localization and autowalk missions for navigation. Target brick positions and orientations are specified in CAD software and exported directly …

https://arxiv.org/abs/2610.26765 2026-10-20T00:00:00Z

General-purpose manipulation requires reliable behavior across embodiments, objects, and task demands. We introduce HandsOn, a composable simulation platform and benchmark for cross-embodiment dexterous manipulation. It supports five robotic arms, six dexterous hands, and approximately 200 rigid, articulated, and deformable assets in randomized scenes. The benchmark pairs 18,000 curated human demonstrations with 66 human-verified tasks: Core-50 supports demonstration-based learning and execution tests, while Transfer-16 evaluates asset and relation transfer, skill composition, and deformable …

https://arxiv.org/abs/2610.26584 2026-10-20T00:00:00Z

Humanoid robots hold great promise as general-purpose agents in human-centered environments, yet adapting generalist vision-language-action (VLA) policies to real-world humanoid loco-manipulation remains challenging. Unlike fixed-base or wheeled manipulators, humanoids must coordinate locomotion, posture, gaze, and dual-arm manipulation over a high-dimensional whole-body action space, where inaccurate base or waist motions can easily induce unstable and aggressive upper-body compensation. We propose HAF-VLA, a hierarchical action-flow framework for humanoid VLA control. Built upon a …

https://arxiv.org/abs/2610.26507 2026-10-20T00:00:00Z

A bimanual demonstration specifies both what the robot should do and one particular schedule for when each arm should act. Standard imitation learning does not distinguish task-required cross-arm constraints from incidental scheduling choices, and may therefore exploit opposite-arm progress as a shortcut cue, creating spurious cross-arm coupling even where relative timing is irrelevant for the current task phase. We introduce Constraint-preserving Temporal Recombination (CTR), a training-time data intervention that preserves recorded arm-local sensorimotor content while retiming the …

https://arxiv.org/abs/2610.25628 2026-10-20T00:00:00Z

Humanoid robots are envisioned to perform diverse human-level tasks through their anthropomorphic morphology. Their dual-arm configuration enables a broad range of everyday actions. Yet, as in humans, this morphology can constrain loco-manipulation when both arms are occupied or additional contacts are required beyond their reach. Supernumerary robotic limbs (SRLs) offer a way to extend these capabilities, but their integration requires the added limb to be coordinated with whole-body motion and balance. In this study, we develop and integrate a supernumerary arm into a humanoid platform to …

https://arxiv.org/abs/2610.25459 2026-10-20T00:00:00Z

Bimanual manipulation with dexterous hands has attracted growing attention in research on robotic action models. However, few studies have developed benchmarks specifically tailored for dexterous manipulation, leaving the dexterous manipulation capabilities of existing models insufficiently characterized. In this paper, we present BiDex-100, a simulation benchmark for bimanual dexterous manipulation that combines broad task coverage, multi-dimensional evaluation, and high-DoF hand embodiments. Concretely, the benchmark comprises 106 tasks organized along five capability axes: generalization, …

https://arxiv.org/abs/2610.25287 2026-10-20T00:00:00Z

General purpose multimodal language models (LMs) are increasingly capable of directly controlling robotic arms (e.g., by commanding end effector poses) to manipulate their environment. Tracking the development of these capabilities is important for understanding their potential benefits, such as improving industrial automation, and risks, such as enabling malicious users to produce dangerous chemical or biological agents. To this end, we investigate the ability of frontier multimodal LMs to directly control physical robotic arms. We evaluate seven models at multiple reasoning-effort settings …

https://arxiv.org/abs/2610.25006 2026-10-20T00:00:00Z

Nowadays, robotic telemanipulation enables humans to control robots so as to execute tasks in a manner similar to how they perform them, and serves as an essential approach for collecting on-robot data for robot learning by human demonstrations. The quality of collected demonstrations directly impacts the performance of the learned policy. However, existing telemanipulation systems rely heavily on human operation, particularly for large-scale data collection. Collecting dozens or hundreds of demonstrations is a demanding process, as operators tend to fatigue quickly, especially during the …

https://arxiv.org/abs/2610.23913 2026-10-20T00:00:00Z

Universal Manipulation Interface (UMI) pairs wrist-camera videos with camera trajectories and gripper openings, providing scalable, robot-free data for learning how bimanual actions change a shared scene. Existing interactive world models, however, typically rely on text or single-camera control and struggle to follow each arm's actions while maintaining consistency between the two wrist views. We introduce UMI-WM, an action-conditioned bimanual world model that jointly generates both wrist views from observation history, per-arm relative camera poses, and gripper widths, with cross-view …

https://arxiv.org/abs/2610.23891 2026-10-20T00:00:00Z

A robotic agent operating in an unknown environment must gather sufficient task-relevant information before acting. However, determining when the available information is sufficient remains a challenge. We propose a conceptual hybrid neuro-symbolic framework for task-sufficient active perception in unknown environments. After interpreting a requested task, the agent generates an initial plan and iteratively reevaluates it as new information becomes available. At each iteration, it can acquire a more informative viewpoint, inspect or manipulate candidate objects, ask the user for …

https://arxiv.org/abs/2610.23883 2026-10-20T00:00:00Z

Long-range throwing on unstructured terrain is a key capability for mobile robots in delivery and retrieval tasks, but it requires high release velocity, coordinated whole-body motion, and robustness to terrain-induced disturbances. We present a whole-body kinetic-coordination framework for a wheeled-quadruped manipulator that combines kinetic-chain arm modeling with SQP-based trajectory optimization and a reference-guided reinforcement learning policy for coordinated base motion. The manipulator is first reduced to a kinetic-chain model and optimized under kinematic and dynamic constraints …

https://arxiv.org/abs/2610.23551 2026-10-19T00:00:00Z

Many manipulation tasks that are effortless for dexterous human hands remain challenging for robotic systems equipped with simple, task-specialized grippers. Industrial platforms commonly rely on end-effectors such as suction cups or parallel-jaw grippers, yet no single mode can reliably satisfy the diverse constraints encountered across different phases of complex manipulation tasks, including pickup, reorientation, insertion, and constrained placement. In this work, we investigate whether complementary simple grippers within a heterogeneous bimanual setup can collectively realize tasks that …

https://arxiv.org/abs/2610.23548 2026-10-19T00:00:00Z

Legged robots equipped with manipulators offer promising capabilities for loco-manipulation tasks in unstructured environments. However, achieving task-consistent end-effector behavior during locomotion remains challenging due to terrain-induced disturbances and the strong coupling between locomotion and manipulation, particularly for small-scale quadruped platforms. A reinforcement-learning based whole-body control framework is proposed for quadruped loco-manipulation on complex terrain. The proposed framework combines a hybrid task representation with task-prioritized whole-body learning to …

https://arxiv.org/abs/2610.23123 2026-10-19T00:00:00Z

Vision-Language-Action (VLA) models that directly regress joint-space actions avoid the deployment-time cost of inverse kinematics. However, their training objectives remain misaligned with task success, as joint-space losses ignore the unequal physical consequences of joint errors and visual conditioning lacks explicit focus on hand-object interaction regions. To address these issues, we propose a training-phase prior injection framework for fine-grained bimanual manipulation. First, a physics-grounded flow-matching loss maps the implicit clean-action estimate at every noise level through …

https://arxiv.org/abs/2610.22813 2026-10-19T00:00:00Z

Robot manipulators often come into contact with rigid objects when performing work. This imposes physical constraints on their motion. Simultaneous force & motion control was developed to regulate contact forces commensurate with these constraints, whilst projecting motion control in to the orthogonal, unconstrained directions. This is typically formulated in the task coordinates, i.e. operational space, then mapped to joint torques to command the robot. However, most constraints on the robot control, such as joint limits, collision avoidance, singularity avoidance, etc. are naturally …

https://arxiv.org/abs/2610.22765 2026-10-19T00:00:00Z

Precise pedicel-targeted grasping in strawberry harvesting remains a critical bottleneck due to the pedicel's small diameter (1.3-3 mm), color similarity with surrounding foliage, and precise force control required for clean abscission zone detachment. As a market-grade crop, strawberry aesthetic value makes bruise-free pedicel detachment essential over direct fruit grasping. Classical approaches struggle to unify vision models, motion planning, and contact manipulation into a robust framework, particularly in occluded canopy environments. Therefore, this work presents a visuomotor imitation …

https://arxiv.org/abs/2610.21913 2026-10-15T00:00:00Z

Continuous physical human-robot interaction requires robots to rapidly adapt their control behaviour without interrupting task execution. However, existing ROS 2 control architectures rely on stop-to-switch mechanisms that introduce substantial delays and interrupt execution. We present an open-source, sub-millisecond reflex engine based on an enhanced ROS 2-compatible multimode controller that enables deterministic switching between control modalities and integrates reflex behaviours for mitigating contact hazards and kinematic limit violations. Experiments on a Franka Robotics manipulator …

https://arxiv.org/abs/2610.21292 2026-10-15T00:00:00Z

Maintaining small path-tracking errors under moving reference frames is essential for robotic manipulation tasks with tight execution tolerances, such as machining and surgical automation. Conventional time-indexed controllers, including tracking Model Predictive Control (MPC), rely on a fixed temporal correspondence with the reference trajectory and may therefore accumulate path-relative error under abrupt reference-frame motion or timing mismatch. This paper presents MR-MPCC, a Model Predictive Contouring Control (MPCC) framework for velocity-controlled robotic manipulators with 6-DoF …

https://arxiv.org/abs/2610.20968 2026-10-14T00:00:00Z

Executing heavy-duty physical manipulation in unpredictable environments remains a major challenge for quadrupedal robots lacking dedicated manipulators. This paper presents SOMA, a hierarchical reinforcement learning framework for whole-body non-prehensile manipulation of multi-object stacks using a quadruped robot. Unlike traditional methods restricted to two-dimensional planar pushing, SOMA integrates explicit robot base-height control, unlocking full three-dimensional pushing strategies. This capability enables the quadruped to manipulate complex payload stacks as a unified system while …

https://arxiv.org/abs/2610.19753 2026-10-14T00:00:00Z

Vision-language-action (VLA) models have shown strong potential for general-purpose robotic manipulation, but extending them to bimanual dexterous manipulation introduces a high-dimensional and structured action space. Existing bimanual VLA policies commonly concatenate right- and left-side arm--hand actions at each control timestep, leaving cross-hand interactions implicit within a single action vector. We introduce Coordi-$π$, a structured action representation for bimanual dexterous manipulation. Coordi-$π$ represents the right- and left-side arm--hand actions as individual action tokens …

https://arxiv.org/abs/2610.19617 2026-10-14T00:00:00Z

Instruction-Conditioned Motion Control (ICMC) separates parameter specification, instruction generation, and code synthesis for language-driven robot control, making execution outcomes traceable to instructions and programs. We compare one-shot generation with ICMC under o1 and o4-mini on cube pick-and-place and letter-reshaping tasks for a UR5e arm in MuJoCo. We then train an open-weight instruction policy by GRPO through a frozen code generator on cube placement onto two- and five-cube letter layouts, averaging the rewards of five programs per instruction. The logged positive-reward rate …

https://arxiv.org/abs/2610.19527 2026-10-14T00:00:00Z

We devise a dual-arm cooperative planning framework for wiping table surface in the presence of scattered objects. Unlike conventional surface-cleaning strategies that only cover free areas and detour around obstacles, our framework explicitly assigns one arm to rearrange objects while the other performs coverage wiping, thereby enabling access to previously obstructed regions. Specifically, we first construct a set of wiping and object-rearrangement action primitives. Based on these primitives, we introduce Geo-MILP, a geometry-aware task planner formulated as Mixed-Integer Linear …

https://arxiv.org/abs/2610.18822 2026-10-13T00:00:00Z

Egocentric human videos offer a scalable alternative to robot teleoperation for collecting dexterous manipulation data. However, two challenges limit their use as reliable training data: accurate hand-object interaction (HOI) reconstruction from monocular RGB and high-quality robot demonstrations, especially visual observations. We present EgoMatrix, an end-to-end data engine that converts monocular egocentric human videos into bimanual dexterous trajectories and paired robot observation videos, with the trajectories directly replayable on real robots. It reconstructs HOI with emphasis on …

https://arxiv.org/abs/2610.18774 2026-10-13T00:00:00Z

A robot needs a world model that predicts how its actions will change the scene and a policy that chooses those actions. Models are usually built and evaluated for only one of these roles, and every robot records its actions in its own format. We ask whether one robot world model can serve both roles across different bodies, and what makes this work. We present GreenWAM, a world foundation model for robotics, together with the recipe that produces it: (1) a shared anatomical action space that describes 20 robot families, from bimanual arms to dexterous humanoids, in common joint coordinates; …

https://arxiv.org/abs/2610.18425 2026-10-13T00:00:00Z

Cooperative aerial manipulation is difficult under wind, payload motion, and noisy goal broadcasts because multiple Unmanned Aerial Vehicles (UAVs) are coupled through a shared payload. We present CALM (Cooperative Aerial Learned Manipulation), a decentralized controller for aerial manipulators carrying a basket while tracking a moving ground robot. CALM combines a parameter-shared Multi-Agent Reinforcement Learning (MARL) policy, trained using Multi-Agent Proximal Policy Optimization (MAPPO), with goal estimation, per-UAV Extended State Observers (ESOs), basket-mass estimation, and …

https://arxiv.org/abs/2610.18123 2026-10-13T00:00:00Z

Broadcast spraying remains the dominant method of disease control in greenhouse tomato production, yet it treats healthy and diseased tissue alike, exposes workers to hazardous aerosols, and depends on operator skill. This paper presents MARTS (Modular Agricultural Robot for Targeted Spraying), a low-cost robotic platform that closes the loop from plant-level disease detection to leaf-localised spray delivery in commercial greenhouses. MARTS integrates a Clearpath Husky A200 mobile base, a UR5 manipulator, a novel modular spraying end-effector built around a single 12 V micro-diaphragm pump, …

https://arxiv.org/abs/2610.17534 2026-10-13T00:00:00Z

Actuator sizing is an early and consequential decision: joint torque and velocity specifications fix the motors, gearboxes and brakes before any CAD model exists. Sim4RAD is a MATLAB toolkit for that phase and for the verification that follows it. It builds a rigid-body model from a handful of parameters, and four analyses supply the specification: a static analysis combining lever-arm sampling with a posture search, giving a rated torque at a chosen payload envelope and a reproducible peak torque; a dynamics pipeline that reshapes a trajectory under one of four constraints, including the …

https://arxiv.org/abs/2610.16855 2026-10-12T00:00:00Z

Real-time bimanual humanoid teleoperation requires accurate wrist tracking while keeping arm configurations predictable. Because a 7-DoF arm admits multiple elbow configurations for the same wrist pose, wrist-only tracking can cause elbow drift or abrupt configuration changes. Fixed anthropomorphic constraints can stabilize elbow posture, but they can also block the redundant adjustments needed near singular configurations. We propose a human-like redundancy-resolution framework that combines adaptive elbow guidance with singularity-robust wrist tracking. Shoulder-wrist geometric retargeting …

https://arxiv.org/abs/2610.16256 2026-10-12T00:00:00Z

Head-mounted body and bimanual motion capture supports self-avatars, teleoperation, and embodied demonstrations. However, a single egocentric camera is vulnerable to a limited field of view, scale ambiguity, and hand-object occlusion. We present EgoWholeView, a wearable capture system of six synchronized wide-angle RGB cameras with a role-specialized pipeline. The outward views localize the rig in a world frame, while an overlapping downward pair independently predicts SMPL-X body and MANO hand parameters. Both predictors are adapted to egocentric fisheye data. To combine the two, reliability …