Perception, SLAM & 3D Mapping感知、SLAM 与三维建图

Dexterous manipulation with multi-fingered hands is the next frontier of robotics, yet learned hand skills remain limited to simple grasps or basic repeated motions, such as rotating an object. As robots attempt more demanding in-hand maneuvers, safety, such as not dropping the object, becomes critical, yet it is rarely measured. We study in-hand object pose reaching, a task that demands diverse and difficult grasps: moving an object to almost any position and orientation within reach of the fingers, at any wrist orientation, through long sequences of consecutive goals. We present a recipe …

We present RESPLE2, a recursive multi-sensor state estimation framework using non-uniform B-splines for 6-DoF motion representation. By exploiting the knot-clamping boundary property, we propose a theoretically grounded mechanism for exact control-point prediction directly informed by inertial kinematics along the trajectory, with knot placement adapted to motion and measurement availability. Within an iterated extended Kalman filter, we perform this prediction using a subset of inertial measurements. A subsequent reset step preserves trajectory consistency as the knots extend. The update …

Accurate camera-LiDAR calibration is an essential prerequisite for robust multi-modal perception in robotics. Recent target-less methods based on learned pixel-point correspondences achieve high extrinsic calibration accuracy and generalize across environments. However, they operate on rectified images with known camera intrinsics, restricting their applicability to systems whose cameras have already been individually calibrated. We present a fully automatic, target-less framework that jointly estimates camera intrinsics, radial-tangential distortion, and camera-LiDAR extrinsics from raw …

Active simultaneous localization and mapping (SLAM) addresses the problem of planning robot motion to build complete and accurate maps of unknown environments through efficient exploration while maintaining high localization accuracy. This raises a dilemma between exploring unknown spaces to expand coverage and exploiting visited regions to perform active loop closures. Despite numerous prior works on ground robots, aerial robots with high agility and constrained sensor suites face more significant localization drift and thereby demand dedicated active SLAM planning. Moreover, a unified …

This study develops an integrated, reproducible design assessment for a four-wheel educational rover intended for the high-school remote-control division of the 2027 NASA Human Exploration Rover Challenge. The architecture combines commercial differential drive control, independently sprung wheel carriers, separate drive and task batteries, and a Raspberry Pi-based subsystem that executes received imaging and ranging commands. The analysis reconciles component lists with dimensioned computer-aided design views, derives mobility and electrical constraints, and connects sensor geometry to …

Sparse event responses produce uneven keypoint errors whose effects on spacecraft pose depend on correspondence geometry and the reliability of successive observations. We present a reliability-aware framework connecting polarity--time localization, geometric recovery, event--CAD refinement, and trajectory optimization. A three-branch representation combines positive events, negative events, and recent-event timing through cross-branch attention and gating, followed by spatiotemporal aggregation. An ordered semantic-point head estimates relative correspondence precision for geometrically …

Quadruped robots are increasingly deployed in hazardous environments such as disaster response and facility inspection, where external-camera monitoring is essential for safe operation. This setting is challenging because quadrupeds are articulated systems with time-varying leg joints, leg symmetry, and frequent self-occlusions, which make keypoint correspondence ambiguous. Moreover, no public benchmark exists, making quantitative comparison difficult. To address these challenges, we propose QuadPose, which estimates the full-body 18-DoF pose (6-DoF base pose + 12-DoF joint angles) from …

Handheld data-collection interfaces such as the Universal Manipulation Interface (UMI) allow manipulation demonstrations to be gathered in the wild without a robot in the loop, but the quality of the resulting action labels is bounded by the accuracy of vision-based localization. Existing systems recover end-effector pose from monocular visual-inertial odometry, which is subject to scale ambiguity and drift, or delegate tracking to closed-source modules and external infrastructure that reintroduce cost and setup burden. We present OpenJaws, a fully open hardware and software framework for …

Monocular outdoor navigation requires robust camera motion estimation and a dense, navigable map, where 3D Gaussian Splatting SLAM serves this task through an explicit differentiable parameterization and closed-form projection. However, typically, the geometry is recovered by associating 2D pixels with 3D points, so a modular SLAM system absorbs tracking error into the map, leading to cascading degradation. To address these gaps, we present SG^2SLAM, which couples streaming spatial geometry with a ray-conditioned 3DGS kernel. Streaming spatial geometry replaces the per- frame …

Visual Place Recognition (VPR) is an important means for loop closure detection in visual Simultaneous Localization and Mapping (SLAM). While state-of-the-art VPR and SLAM approaches excel in urban and feature-rich natural environments, the vast and feature-poor environments of extraterrestrial surfaces like on the Moon or Mars pose severe challenges for existing approaches. This paper presents a novel benchmark, VPR-Space, to evaluate VPR capabilities on extraterrestrial surfaces. There are three contributions: (1) We collected sixteen VPR database-query datasets based on existing data from …

Efficient robotic data collection remains a major bottleneck for vision-language-action (VLA) policy learning, especially for tasks requiring accurate end-effector positioning and camera-action alignment. This challenge is particularly severe in electronic-waste disassembly, where robots operate in cluttered assemblies of densely packed, visually similar components. Full digital-twin simulation is difficult because many parts are thin, reflective, or mechanically complex, making accurate object-level meshes and contact models difficult to obtain. In this work, we focus on pre-contact reaching …

Accurate localization in GPS-denied and visually degraded environments affected by smoke, dust, or fog remains a critical challenge for autonomous systems. While LiDAR provides high-resolution spatial perception, its performance deteriorates under particulate occlusion. In contrast, frequency-modulated continuous-wave (FMCW) radar offers robustness under such conditions but suffers from sparse measurements and outliers. This article presents a resilient decentralized LiDAR Radar Inertial Odometry (LRIO) framework that fuses the complementary strengths of LiDAR, radar, and inertial sensing to …

For safety of the intended functionality (SOTIF) analysis according to ISO 21448, a machine learning object detector for light detection and ranging (LiDAR) point clouds can meet a performance target, a limit on the mean per-frame share of wrong detections among accepted detections, by rejecting detections above an uncertainty threshold. A threshold selected on data of one condition carries a statistical guarantee only for data distributed like its selection data, whereas SOTIF analysis covers every triggering condition. This paper presents an uncertainty evaluation in which the threshold is …

This paper studies UAV swarm search in GNSS-denied maritime environments, where inter-UAV ranging drives cooperative localization and uncertainty propagates along the multi-hop reference chain, affecting connectivity, collision avoidance, and search effectiveness. We propose an uncertainty-aware control barrier function (CBF) framework approximating cascading localization covariance through Fisher information matrices. First, the cascading covariance model captures how ranging noise and neighbor uncertainty accumulate along the localization chain. Second, uncertainty-tightened CBFs …

Visual captures provide detailed scene appearance, but converting them into interactive simulation environments requires object reconstruction, physical modeling, and correction of intermediate errors. We present SceneAgent, an agentic pipeline that coordinates these steps through simulator-based visual inspection and repair. The pipeline processes 3D Gaussian Splatting (3DGS), photogrammetry, LiDAR captures, AI-generated 3DGS scenes, and 4D videos of dynamic scenes, and combines object segmentation, physical parameter estimation, part decomposition, articulation, and deformable simulation. …

This report investigates an acoustic surveillance framework for localizing and tracking narrowband adversarial acoustic sources that threaten offshore data centers. Unlike conventional sound source localization (SSL) methods that rely on broadband signals and compact receiver arrays, the considered scenario involves narrowband emissions and sparse sensors. In such scenarios, the observed time-difference-of-arrival (TDOA) measurements are aliased and produce an ambiguous solution space, rendering conventional localization methods ineffective. To address this challenge, we integrate a mobile …

We propose a novel method for robust point cloud registration with only one tunable parameter. Our method, dubbed TLP, uses truncated $L_p$ functions with different values of $p$ to assign priority scores to correspondences, select the hypothesis, and refine the final model. By leveraging the robustness of truncated functions, TLP effectively handles the high outlier rates commonly encountered in real-world 3D feature matching. We also exploit GPU parallelization to evaluate hypotheses efficiently, enabling registration from thousands of correspondences in under a second on average. With only …

Construction robots operating near workers require navigation that can anticipate human motion while remaining robust to dynamic and unstructured site conditions. However, existing social navigation methods depend on hand-crafted interaction rules, labeled demonstrations, or robot-specific control policies, limiting their scalability and transferability in construction environments. We propose a real-time, LiDAR-only framework that learns interaction-aware path corrections from unlabeled demonstrations. Constant-velocity extrapolation generates residual learning targets, while a GNN models …

Dynamic and continuously evolving environments present significant challenges for robotic mapping and scene understanding, particularly on construction sites where moving agents, temporary obstacles, and persistent structural changes coexist. While dynamic and long-term SLAM methods can detect motion and environmental changes, their outputs are predominantly metric representations that provide limited structure for higher-level spatial and temporal reasoning. This paper presents a LiDAR-based real-time temporal construction scene graph (T-ConSG) that jointly represents free-space regions, …

Floor traction influences wheel-slip behavior, dead-reckoning accuracy, and the navigation performance of wheeled mobile robots that rely on wheel odometry. As these robots become increasingly common in GNSS-denied indoor environments, including automated manufacturing and retail facilities, their onboard measurements could also be used to characterize floor conditions and improve localization. In this study, a skid-steer robot was driven over five floor surfaces with distinct traction characteristics using commanded velocity profiles designed to induce wheel slip through repeated …

High-performance optical flow networks are difficult to deploy on resource-constrained edge accelerators because their iterative refinement warps features by the current flow, which relies on flow-dependent resampling and data-dependent memory access. We present TinyFlow, a 1.26M-parameter warp-free optical flow network that preserves iterative coarse-to-fine refinement by replacing the warp with a fixed-window correlation over constant offsets, so the whole network compiles as a single static INT8 graph. Quantization-aware fine-tuning, warp-teacher distillation, and model souping reduce the …

Rapid illumination transitions can disturb Visual SLAM (VSLAM) by saturating images before the Automatic Exposure (AE) policy adapts, removing the visual correspondences needed to maintain tracking. Our proposed methods mitigate this disturbance at two levels: B-Adapt acquires adaptive exposure brackets to cover the scene dynamic range while promoting photometric overlap, and BVSLAM directly uses the multi-exposure sequence as constraints in a factor graph state estimator without relying on High Dynamic Range (HDR) merging. We evaluate both methods against state-of-the-art approaches in …

Indoor UAV localization with minimal onboard sensing remains challenging, particularly in dynamic environments. We propose augmented filtered Monte Carlo localization (AF-MCL) for 2D localization using only four single-point range sensors and measured heading. AF-MCL rejects range measurements inconsistent with the known static map and adaptively injects particles to recover from localization divergence and kidnapping. Beam classification is performed only at the previous position estimate, making its ray-casting cost independent of the particle count. The particle distribution additionally …

Open-vocabulary 3D semantic maps have emerged as a key spatial memory representation for long-horizon robot autonomy, enabling robots to reason about objects, their spatial relationships, and past observations across time. However, existing object-centric semantic maps are primarily designed for static environments and rely on an append-only point integration strategy, where newly observed points are accumulated but previously integrated points are rarely reevaluated. Consequently, perception errors accumulate over time, and outdated points persist after objects move or disappear. Although …

Vision and touch provide complementary cues for object pose and local contact geometry, but external cameras are often occluded at the contact site. We present GelSlim 5.0, a fingertip sensor that acquires visual and tactile observations with one fixed camera and a continuous UV-responsive contact layer. By switching illumination, the camera sequentially acquires through-membrane visual images and contact-sensitive tactile images from a shared viewpoint, avoiding inter-camera extrinsic calibration. To combine these observations, we introduce VisTacFusion, a multimodal transformer with …

Multi-robot SLAM allows robots to improve their estimates by exchanging map information, but repeated exchanges create unknown correlations between local estimators. Covariance intersection (CI) can fuse estimates without tracking these correlations. In right-invariant extended Kalman filter (RI-EKF) SLAM, however, point features obtain their invariant errors through the robot rotation, so a neighbor's map estimate is expressed in its own error coordinates and is correlated with its pose, and cannot be fused by CI directly. This paper presents Joint-CI, a unified fusion method for distributed …

Generated robot videos can look convincing while depicting the wrong interac- tion: a different object is moved, a grasp disappears, or a placement ends out- side its destination. We introduce RGraph-Eval, a reference-based framework that makes these discrepancies explicit through task-grounded temporal scene graphs. Unlike approaches that construct separate evidence representations for different evaluation dimensions, we organize task entities, interactions, and motion within a unified, interpretable scene graph representation. A foundation-model pipeline identifies manipulation roles, …

Autonomous mobile robots operating in dense crowds and cluttered sites require $360^\circ$ perception to react to surrounding hazards. While panoramic LiDAR offers full-surround coverage, learning representations within reinforcement learning (RL) is sample-inefficient under sparse rewards, and existing 3D pretrained point-cloud encoders are too memory-heavy for massively parallel RL simulation. We present RangeNav, a compact (183k parameters) LiDAR range-image encoder pretrained entirely on synthetic data. RangeNav uses anisotropic convolutions and circular padding to handle the extreme …

Many robotic construction applications, such as progress tracking, require registering a sensor trajectory to a prior 2D floor plan. Visual capture is attractive for its low cost and availability, but aligning a visual simultaneous localization and mapping (VSLAM) map to a floor plan is difficult; VSLAM recovers geometry only up to an unknown similarity transform, the sparse point cloud is cross-modal to the symbolic floor plan, sites are only partially built during capture, and construction sites are visually repetitive, degrading map quality while removing distinctive features. Existing …

Recently, multi-node inertial measurement unit (multi-IMU) systems have shown promise for robust odometry in legged robots. Multi-IMU fusion can improve legged robot odometry but requires accurate spatiotemporal calibration among the sensors. Existing multi-IMU calibration methods, designed for aerial or handheld platforms, face challenges on legged robots because routine locomotion may provide insufficient excitation, while foot slips, impacts, and vibrations introduce measurement disturbances. To address these challenges, we propose A2I-Calib++, a kinematics-driven anti-noise active …

Robots deployed in human-centered environments need maps that support both geometric navigation and open-vocabulary semantic queries beyond a fixed label set. A key challenge is enriching such maps with semantic information without relying on manually annotated segmentation masks or closed-set semantic categories. Existing geometry-driven active mapping maximizes coverage but treats semantics as a passive by-product of the collected trajectory, whereas active semantic mapping typically depends on supervised semantic segmentation. We present AOV-GS, an active 3D Gaussian mapping system that …

Accurate 6-DoF object pose tracking is essential for robotic interaction, yet conventional monocular pipelines frequently suffer from catastrophic divergence under rapid object motion. We present RoPT, a robust tracking framework engineered to overcome this limitation by unifying visual perception, temporal kinematics, and global re-localization into a tightly coupled closed loop. Unlike existing open-loop trackers, RoPT delivers three critical capabilities that fundamentally alter system resilience. First, the visual perception component tracks object masks to robustly handle partial and …

Target-based extrinsic calibration estimates the rigid transform between sensors from a few observations of a known target, and its result is commonly assessed by the root-mean-square error of the fitted residuals. However, this scalar error is computed on the same observations and therefore cannot indicate whether to accept the result, re-extract, recollect or add observations. This paper presents VeriCalib, which formulates extrinsic calibration as a verifiable estimation problem and reports a calibration state. The key insight is a two-level extrinsic compensation mechanism, in which the …

Accurate ground plane normal estimation is essential for odometry in spherical mobile mapping systems (SMMS), which face challenges from rapid rotations and limited ground coverage. We propose two RANSAC-based approaches: single-scan estimation with normal vector scoring and multi-step validation, and LiDAR-inertial odometry (LIO)-based estimation using a global 3D map. Evaluated across diverse real-world datasets against terrestrial laser scanner ground truth, results show that LIO-based estimation significantly outperforms single-scan methods in accuracy and robustness. Integrating ground …

Collaborative perception enables agents to retrieve the scene semantics and geometry beyond the field of view of any individual agent. This broader scene understanding enhances transportation safety and improves efficiency in multi-robot systems. However, existing collaborative semantic occupancy methods rely on dense 3D voxel annotations and are limited to recognizing objects within a predefined set of semantic classes. To overcome these limitations, we present CoGaussian, an open-vocabulary Gaussian-based collaborative semantic occupancy prediction framework. CoGaussian represents a scene …

Semantic occupancy mapping supports embodied perception during exploration and detailed scene understanding afterward, giving rise to two complementary requirements: online incremental mapping for maintaining an up-to-date global map under causal constraints, and offline global map refinement for improving the completed scene representation with additional computation. We present VEOcc++, a unified voxel-centric framework that connects both stages through a persistent sparse voxel feature map. During exploration, the map expands with newly observed regions and integrates aligned local …

3D scene graphs support language-guided navigation by organizing physical entities and their containment and spatial relations into hierarchical maps. Building such structured maps requires a scene representation that consistently distinguishes semantic regions and object instances across viewpoints. To this end, we present PanoGraphGS, a unified framework that integrates panoptic 3D Gaussian representation learning with hierarchical 3D scene graph construction. The framework learns semantic and instance features on shared Gaussian geometry. Prototype-based semantic learning and …

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable …

Omnidirectional cameras provide surround-view information, significantly overcoming the field-of-view constraints for traditional visual localization systems. However, existing localization systems fail to fully exploit the characteristics of omnidirectional cameras, struggling to deliver accurate and robust localization performance amidst scene content variations and illumination-induced appearance changes. In this work, we propose OmniVLoc, a surround-view localization system based on a topo-metric framework. By integrating state-of-the-art global place recognition and monocular depth …

In real-time autonomous field applications, GNSS is often unreliable and inaccurate. A possible solution is localizing against a prebuilt map like a satellite image, as it is georeferenced and already surveyed. In this work, we localize a spinning radar measurement against overhead RGB imagery with a learned observation model. We use a radar representation pretrained by masked reconstruction and align it to features from a satellite image. A particle filter propagated by radar odometry proposes candidate poses, and our observation model provides a likelihood over these poses. We evaluate our …